Trade show pop-up tent
Specification: 3 by 3m , 3 by 4.5m , 3 by 6m ,
10 by 10 foot, 10 by 15 foot, 10 by 20 foot
Canopy Roof Material: 420D oxford PVC coated, waterproof
Side wall material: 210D oxford , or same as roof material
Fabric colour: red, black, white, yellow, orange, purple, pink, maroon
Frame: powder coated steel, strong characteristic
Trade show pop-up tent characteristic:
It is extremely essential to erect Trade show pop-up tent properly, For this,
you may take the help of professionals or follow the steps discussed in this article.
It is an attempt to guide you regarding the handling of gazebo so that you do not
face any kind of complication.
Step 1: One person either sides grasps the lower “V” truss.
Step 2: Lift and walk backwards
Step 3: As you walk, the gazebo will slowly rise
Step 4: Raise the bar as you go
Step 5: Once fully opened, move to each corner and slide connecter up toward the button
Step 6: Place one hand on top of gazebo and other hand on truss
Step 7: Push both hands towards each other
Step 8: Push connector up until button locks into position
Step 9: Extent legs to desired height
Step 10: Lift until button locks into position
For large gazebo you need to fully open gazebo to Step 4 above, position one person under
mid connector and lift until gazebo legs raise just off the ground. Keep in mind that Second
person should lock connector in position using technique in Step 6 above.
Step 1: Push buttons to release legs and lower gazebo. Push button on connector and slide down
Step 2: Using two people on opposite sides, each should carefully grasp V truss
Step 3: Push down on truss
Step 4: Lift and walk inwards towards each other
Make sure the gazebo wall is totally dry before putting away for any time span.
If they are wet or moist while packing the pop up gazebo, you should unload them
and dry them out completely before putting away.
Price terms and conditions: FOB, CNF, CIF, EXW, DAP, CIP etc.
Shipping plan detail: our goods can be shipped by sea, by air, by land,
Buyer can tell us extra request about shipment issue.
A: How do we get the sample?
Sample itself can be free if sample is low cost, for example
small umbrella,beach ball or hat etc. Sample has to be paid
if sample is high cost and require Logo printed, for example,
luxury golf umbrella, resort garden umbrella, big fold tent etc.
B: May you tell us Goods production time if you do not mind ?
That need discuss according to goods quantity, order time seasons
C: We are wondering know Payment term and condition?
Payment can be done by T/T (wire transfer), West Union, PayPal
In a word, Welcome to contact us by email or calling if would
love to obtain furthermore information in detail .